Wash & Wax
Clean and wax your car or truck in one easy step
Great for hand washing, Allbrite Wash & Wax is a combination soap and wax that can be applied in one step to cars and trucks. This time-saving formula contains a (strong? mild? Existing copy says both) cleanser that is excellent at cutting through grime on hard surfaces. Allbrite Wash & Wax is a concentrated solution that is made in the USA with a pH of about 8.
Recommended dilution for Allbrite Wash & Wax is 1:60 to 1:100, or, add 1-2 oz. of shampoo to a gallon of water, depending on desired strength. Allbrite Wash & Wax saves you time—just rinse off its moderate foam and the specialty silicone wax in the formula leaves a shining, protective finish.
• Easy to rinse off
• Biodegradable
• Solution has a pH of about 8
• Concentrated
• Recommended dilution range is 1:60 to 1:100
• Made in the USA by Allbrite
- 1. Dilute Allbrite Wash & Wax as needed. We recommend dilution in the range of 1:60 to 1:100; be aware that a strong dilution such as 1:30 can strip wax.
- For car washes, 1 half gallon to 1 gallon of Allbrite Wash & Wax can be diluted to make about a 55 gallon drum, depending on desired strength.
- 2. First, wet the vehicle and rinse off any dirt or dust particles. Apply by soaking the wash pad or a mitt in ready-to-use solution and rub the surface of the vehicle. Then, rinse off the surface with clean, preferably soft, water.
- 3. Use a chamois or a large microfiber towel to dry off the vehicle quickly to avoid any water spots caused by hard water.
- 4. If the car or truck is very dirty, add some degreaser such as Allbrite Kiss-Off, Allbrite APC or Allbrite Citrus Klean to the diluted solution. This will provide additional cleaning power.
Related Products
